unisonic technologies co., ltd 2sc3355 npn silicon epitaxial transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r201-036.ba high frequency low noise amplifier ? features * low noise and high gain * high power gain to-92 1 ? ordering information ordering number normal lead free halogen free package packing 2SC3355-T92-B 2sc3355l-t92-b 2sc3355g-t92-b to-92 tape box 2sc3355-t92-k 2sc3355l-t92-k 2sc3355g-t92-k to-92 bulk 2sc3355-t92-r 2sc3355l-t92-r 2s c3355g-t92-r to-92 tape reel 2sc3355l -t92 -b (1)packing type (2)package type (1) b: tape box, t: tape reel (2) t92: to-92 (3)lead free (3) g: halogen free, l: lead free, blank: pb/sn
2sc3355 npn silicon epitaxial transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r201-036.ba ? absolute maximum rating (t a =25 , unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo 20 v collector-emitter voltage v ceo 12 v emitter-base voltage v ebo 3 v collector current i c 100 ma total power dissipation p t 600 mw junction temperature t j 125 operating temperature t opr -20 ~ +85 storage temperature t stg -40 ~ +150 note 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied 2.the device is guaranteed to meet performance specification within 0 ~70 operating temperature range and assured by design from ?20 ~85 . ? electrical characteristics (ta=25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector cutoff current i cbo v cb =10v, i e =0 1.0 a emitter cutoff current i ebo v eb =1v, i c =0 1.0 a dc current gain h fe v ce =10v, i c =20ma 50 300 gain bandwidth product f t v ce =10v, i c =20ma 7 ghz feed-back capacitance c re v cb =10v, i e =0, f=1.0mhz 1.0 pf noise figure nf v ce =10v, i c =7ma, f=1.0ghz 1.1 db utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|